Swimming pool heat pumps are one of the most energy-efficient pool heating options available nowadays. Pool heat pumps help pool owners to extend their pool season without making a hollow in their pocket, as it just costs 1/3rd of gas heating.
Did you know that you can make your pool heat pump 2X more energy-efficient? Well, heat pump maintenance is essential for dependable performance; however, there are a few other ways that can make your pool heater operate more efficiently. In this post, we’ll show you how to make your pool heat pump more energy-efficient.
Keep the Evaporator Coil & Vents Clean At All Times
With time, parts inside the heat pump may witness wear and tear, which is normal; however, some parts will get dirty in the process. For instance, a dirty evaporator coil can significantly lower your heat pump’s ability to gather heat, almost reducing it by half. Here are some indispensable times when you should clean your heat pump’s evaporator coil:
- At the start of every pool season
- After a flood
- After an occurrence of a major storm
When you keep your heat pump’s evaporator coil clean, you ensure that your swimming pool heat pump can collect heat, working at its best efficiency. Similarly, vents are located on the heat pump’s side covering the evaporator coil, which should be kept clean to prevent curtailing airflow. Check for leaves and branches, and clean up any waste that accumulates.
When Pool Heater Is Turned Off – Keep Your Pump Operating At a Low Speed
When the heater is turned off, get the water to circulate by operating your pump at lower speeds. Operating your pump during the night (non-peak hours) is the cheapest; this is a fantastic tactic for pool owners who don’t want to heat again their pool every morning during colder weather.
Get Solar Cover to Enhance Your Swimming Pool’s Heat Retention
Heating the water is not a problem with a pool heating system, but keeping the water warm is. And you’ll have to keep your pool heating functioning to maintain a steady water temperature. If you’re like the other pool owners, then you will be doing that for at least 8 hours/day.
Once you turn off your heater, your pool will go through a normal process of heat loss. And when the water circulation is stopped, your pool discharges heat from its surface. Windy storms and colder weather conditions can further accelerate this cooling-down process. If you’re not concerned about bills and budget, then this wouldn’t affect you. However, if you want to enhance your pool’s ability to retain heat, and curtail the amount of time you operate your heater, then you need to start using a solar cover.
When you use a solar cover, it will not only boost your pool’s heat retention but also curtails water loss. With the better heat retention and an appropriate water level, you’ll observe your heating time to warm up your pool is much speedier.
Install an Automatic Timer to Make Your Pool’s Water Heating Cycles More Precise
Whenever your pool attains a pre-set temperature, the automatic timer turns ON and powers up your pump and heater. So, when you’re away, it helps to keep your pool waters warm and welcoming for unplanned or spur-of-the-moment swims.
Filters & Baskets Should Be Cleared Out At Least Once a Week
To ensure your pool’s water circulates smoothly:
- Clear out the pump and skimmer baskets at least once every week.
- Clear out the pool’s filter on alternate weeks as a minimum.
When the water can move through the system effortlessly, the better your pool’s heat distribution gets.
Get the Right Size of Pool Heat Pump
It’s imperative to buy the right size of swimming pool heat pump sufficient enough to heat your pool area smoothly. For instance, if you have a bigger pool but have a small heater, then you’ll have to operate it for longer, almost 2X times, than when you use a larger (i.e. the right size) heat pump as per your pool area.
Use Swimming Pool Solar Heating Along With a Heat Pump
Well, it may be strange to think that using two different kinds of pool heaters together can save you money, but it can! Nevertheless, it greatly depends on the heater types you’re using. If you’re using a solar pool heater along with a heat pump, you can save substantial money on your energy bills.
As solar pool heating systems only require an operational filter pump to work, they cost much less to operate than most heaters. However, they require continuous direct sun’s light to operate.
So, here is what you can do: On days wherein ample sunlight is available, use your solar heating system and reserve your heat pump for cloudier and colder days – this way, you can easily curtail your heating bill by half.
There you are! You can apply these tactics and make your pool heat pump 2X more energy-efficient. Call 02 8850 4030 now & Check our Google Reviews, we’d be delighted to hear from you.